To Next PageTo Next Page
Need help?Do you have a question about the Feig Electronic TST FUF2-C and is the answer not in the manual?
General| Frequency | 13.56 MHz |
|---|---|
| Protection Class | IP65 |
| Operating Temperature | -20°C to +55°C |
| IP Rating | IP65 |
| Supported Transponders | ISO 15693 |
| Interfaces | Ethernet, RS232, USB |
| Power Supply | 12 to 24 V DC |
Specifies the controller's design for motors and its use in industrial or commercial contexts.
Details prohibited uses and circumstances that lead to liability for damages.
Demonstrates testing procedure using a transmitter-receiver light barrier.
Details parameter settings for activating and configuring safety function testing.
Mounting the board set on a frame and considerations for other housings.
Details dimensions and drilling plan for the plastic housing variant.
Covers dimensions for 300x400mm, 400x600mm, and 600x600mm steel housings.
Details the connection of power cables for TST FUF2 and TST FU3F controllers.
Provides instructions for connecting motor and brake cables.
Details connecting electrical and dynamical optical safety edges.
Details connecting safety edges to input 10.
Details the installation and function of the TST LGB light curtain.
Covers connection of absolute and mechanical limit switches.
Details the procedure to enter the controller's parameter setting mode.
Explains how to select, modify, and save parameter values.
Explains automatic parameter acquisition and setting limit switch systems.
Step-by-step guide for commissioning with encoders.
Guide for commissioning using mechanical limit switches.
Procedure for activating and commissioning the TST LGB light curtain.
Illustrates door opening with frequency converter, detailing ramps and speeds.
Illustrates door closing with frequency converter, detailing ramps and speeds.
Lists error codes, descriptions, and possible reasons for faults.
