Feig Electronic TST FUF2-C User Manual

TST
Assembly instructions
FUF2 / FU3F-A/-C/-F
FEIG ELECTRONIC GmbH
Page 66 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
6.7 Interface card TST RFUxFCOM
Optionally, the interface card TST RFUxFCOM provides an RS-485 and a CAN interface.
This allows connections to partner controller or to an external TST RFUxK board, for example.
Figure 40: Interface card TST RFUxFCOM
The interface card does not have to be activated by means of parameters.
In order to reach the connectors 71-76 and B1 – B2 easier, the green and yellow plug of
the interface card TST RFUxFCOM should be removed first.

Feig Electronic TST FUF2-C Specifications

General

Brand	Feig Electronic
Model	TST FUF2-C
Category	Controller
Language	English