Feig Electronic TST FUF2-C User Manual

Name: Feig Electronic TST FUF2-C
Brand: Feig Electronic
Rating: 4 (1 reviews)

114 pages

To Next Page

To Previous Page

TST

Assembly instructions

FUF2 / FU3F-A/-C/-F

FEIG ELECTRONIC GmbH

Page 20 of 114

TST_FUxF-A-C-F_Montageanleitung_EN_15

4.1.3 Mounting the control electronics with mounting holes

Before mounting the circuit board with the mounting holes, the quick fastener (a) must be

removed from the mounting frame.

Notes4
General Information about this Document5
Table of Contents6
Contents6
General Description and Intended Use9
Intended Use10
Incorrect Use10
Target Group11
Personnel Qualification11
Duty of Care of the Operating Company12
Safety Instructions13
Safety Functions in Accordance with en 12453:201715
Connection Example Testing15
Parametrization15
Installation of the Controller16
Version Without Housing (TST Fuxf-Xpr)18
Dimensions of the Drilling's in the Mounting Frame18
Required Free Space in Plastic and Steel Housing19
Mounting the Control Electronics with Mounting Holes20
Version in Plastic Housing (TST Fuxf-Xh)21
Variants in Steel or Stainless Steel Housings22
300 X 400 MM (TST Fuxf-Xsg, Fuxf-Xeg)22
400 X 600 MM (TST Fuxf-Xsgg, Fuxf-Xegg)23
600 X 600 MM (TST Fuxf-Xsxg, Fuxf-Xexg)24
Hygiene Housing Variant (TST Fuxf-Xhz)25
Hygiene Housing Variant (TST Fuxf-Xhy)26
Mount the Board Variant (TST Fuxf-Xpr) in a Steel Housing27
Electrical Connection31
Power Supply Connection33
Tst Fuf233
Tst Fu3F34
Motor and Brake Connections35
Tst Fuf235
Tst Fu3F37
VDC Brake39
Safety Edge on the Integrated Evaluation40
Connection of an Optical Safety Edge41
Connection of an Electrical Resistance Safety Edge42
Safety Edge at the 2Nd Integrated Evaluation (Input 10)43
Connect the Optical Safety Edge at Input 1043
Connect the Electrical Resistance Safety Edge at Input 1044
Input 10 as Digital Output45
Light Curtain TST LGB46
Installation of the TST LGB46
Connection of the TST LGB47
Limit Switch Connection48
Absolute Encoder TST PE or TST PE FSB with WICAB System48
Absolute Encoder TST PD49
Absolute Encoder des50
Incremental Encoder51
Mechanical Limit Switches52
Photo Eye53
External Triggering Devices54
Traffic Light Connection55
Overview of Outputs56
Overview of Inputs57
Optional Plug-In and Expansion Cards58
Wireless Receiver TST SFFE58
Induction Loop Detector TST SUVEK59
Induction Loop Detector VEK MNST1/2/3/460
Safety Edge Monitor TST SURA61
Expansion Card Rfuxk62
Mounting and Connecting the Display and TST Rfuxk62
Expansion Boards Rfuxio-A/-B/-E64
Terminal Assignment TST Rfuxio-B-E65
Interface Card TST Rfuxfcom66
General Operating Instructions to Set Parameters67
Open the Parameter Operation Mode67
Editing a Selected Parameter68
Exit Parameter Operation Mode68
Execute a Reset69
Entry into the Extended Parameter Configuration Mode69
Basic Settings70
Automatic Query of Basic Data70
Commissioning71
With Absolute Encoder or Incremental Encoder72
With Mechanical Limit Switches73
With Light Curtain TST LGB74
New Request for Teach-In of the End Positions76
Boost / Increase in Performance for Low Speeds76
Movement Optimisation for the Door77
Opening of the Door77
Closing of the Door78
Pre-Limit Switch Setting79
Ramp Configuration79
Correction of the Final Positions80
Functions80
Messages81
Error Messages81
Information Messages98
General Messages101
Specifications106
Standards and Directives112

Feig Electronic TST FUF2-C User Manual

Table of Contents

Questions and Answers:

Feig Electronic TST FUF2-C Specifications

Related product manuals

Brand	Feig Electronic
Model	TST FUF2-C
Category	Controller
Language	English