Feig Electronic TST FUF2-F User Manual

FEIG ELECTRONIC GmbH
Page 1 of 114
TST_FUxF-A-C-F_Montageanleitung_EN_15
TST FUF2
TST FU3F
Variants
-A / -C / -F
Assembly instructions
Installation, commissioning, utilization and maintenance
DE
ACHTUNG! WICHTIGE SICHERHEITSANWEISUNGEN!
Den Hinweisen auf Seite 2 dieser Montageanleitung ist Folge zu leisten.
EN
ATTENTION! IMPORTANT SAFETY INFORMATION!
Follow the instructions on page 2 of this manual.
FR
ATTENTION! IMPORTANTES INDICATIONS DE SÉCURITÉ!
Les instructions de la page 2 de cette notice de montage doivent être
observées strictement,
NL
LET OP! BELANGRIJKE VEILIGHEIDSINSTRUCTIES!
Volg de instructies op pagina 2 van deze montagehandleiding op.
IT
ATTENZIONE! INDICAZIONI SULLA SICUREZZA IMPORTANTI!
Prestare attenzione alle note alla pagina 2 delle presenti istruzioni di
montaggio.
ES
ATENCIÓN INDICACIONES IMPORTANTES DE SEGURIDAD!
Deben seguirse las indicaciones detalladas en página 2 de estas
instrucciones de montaje.
DA
PAS PÅ! VIGTIGE SIKKERHEDSANVISNINGER
Oplysningerne på side 2 i denne monteringsvejledning skal følges.
ATTENTION!
Important Safety
Instructions
The specifications of
these instructions
require compliance to
ensure personal safety.
Store these instructions
safely.
Original operating instructions

Feig Electronic TST FUF2-F Specifications

General

Brand	Feig Electronic
Model	TST FUF2-F
Category	Controller
Language	English

Summary

Assembly Instructions

Important Safety Information

Multilingual safety warnings and critical information for safe operation and installation.

1 General Description and Intended Use

1.1 Intended Use

Explains the product's purpose, applications, and compliance requirements.

1.2 Incorrect Use

2 Safety Instructions

3 Safety Functions in Accordance with EN 12453:2017

4 Installation of the Controller

Important Instructions for Safe Installation

Critical safety precautions and warnings before and during controller installation.

5 Electrical Connection

Important Safety Information for Electrical Connections

Critical safety notes and warnings before performing any wiring or maintenance.

5.1 Power Supply Connection

Wiring instructions for connecting the power supply to TST FUF2 and TST FU3F.

5.2 Motor and Brake Connections

Guidance on connecting motors, brakes, and using split ferrites.

5.3 Safety Edge on Integrated Evaluation

Details on connecting electrical and optical safety edges.

5.4 Safety Edge at 2nd Integrated Evaluation (Input 10)

Describes connecting safety edges to input 10, including optical and resistive types.

5.5 Light Curtain TST LGB Installation and Connection

Covers installation and wiring of the TST LGB light curtain as a safety device.

5.6 Limit Switch Connection

Explains connection of absolute encoders and mechanical limit switches.

5.7 Photo Eye Connection

5.8 External Triggering Devices

5.9 Traffic Light Connection

7 General Operating Instructions to Set Parameters

7.1 Open Parameter Operation Mode

7.2 Editing a Selected Parameter

7.3 Exit Parameter Operation Mode

7.4 Execute a Reset

7.5 Entry into Extended Parameter Configuration Mode

9 Commissioning

Pre-Commissioning Checks

Essential checks before starting the controller and its safety devices.

9.1 Commissioning with Encoder

Step-by-step guide for commissioning with absolute or incremental encoders.

9.2 Commissioning with Mechanical Limit Switches

Procedure for setting up and adjusting mechanical limit switches.

9.3 Commissioning with Light Curtain TST LGB

Activating and configuring the TST LGB light curtain application.

9.4 Teach-in of End Positions

9.5 Boost / Increase Performance for Low Speeds

12 Messages

12.1 Error Messages

Lists error codes, descriptions, and possible reasons for faults.