11
Hall in Tirol, 1.2.2012
Bandsaw
FB 540/640/740/840/940
3 Declaration of Conformity
Declaration of Conformity
Manufacturer: Felder KG
KR-FELDER-STR.1
A-6060 Hall in Tirol
Product designation: Bandsaw
Make: FELDER
Model designation: FB 540/640/740/840/940
The following EC guidelines were applied: 2006/42/EG
2006/95/EG
2004/108/EG
The following harmonised norms were applied: EN 1807-1
The prototype test was carried out by: I.N.R.S.
Avenue de Bourgogne
54501 Vandoevre Cedex
Frankreich
12/05/95
EG-Declaration of Conformity
according to Machine Guidelines 2006/42/EG
We hereby declare that the machine indicated below, which corresponds to the design and construction of the model
we placed on the market, conforms with the safety and health requirements as stated by the EC.
This EC Declaration of Conformity is valid only if the CE label has been affixed to the machine.
Modifying or altering the machine without the express written agreement of the manufacturer shall render the war-
ranty null and void.
The signatory of this statement is the appointed agent for
the compilation of the technical information
Johann Felder, Managing Director FELDER KG
KR-FELDER-STR.1 • A-6060 Hall in Tirol
Bandsaw
To Next Page
Loading...
