Indicator LEDs
The 225i, 225Ci, and 225Mi have five indicator LEDs on the housing cover.
General Indicators Color C-225i C-225Ci
Over Heat Red No No
Door open Red Yes Yes
Bin Full Red Yes Yes
Remove Paper Red Yes Yes
SafeSense Yellow Yes Yes
The indicator PC board that operates the LEDs is located on the inside of the housing cover.
o If an indicator LED fails, replace the universal control PC board assembly.
Troubleshooting LEDs
Overheat- The motor has reached the thermal cut out temperature (end of duty cycle).
Door Ajar- Cabinet door is open. Close door.
Bin Full- Waste bin is full. Empty waste bin.
Remove Paper-Shredder is jammed (e.g., paper capacity exceeded).
Safe Sense- Turns shredder off when a hand or object touches the safe sense sensor bar
located around the paper entry slot. Remove hand or object.