To Next PageTo Next PageWhy does Fellowes Voyager A3 machine speed and noise vary during lamination?
The varying speed and noise in your Fellowes Laminator during lamination is normal. It indicates that the automatic AutoLam feature is adjusting to guarantee optimal laminating conditions for items of varying thicknesses.
Why Ready screen does not come on after a long period in Fellowes Voyager A3 Laminator?
If the ready screen on your Fellowes Laminator doesn't appear after a long period, it could be because the machine is in a hot or humid environment. Move the laminator to a cooler and drier area.
Why is my Fellowes Voyager A3 pouch not sealing completely?
The pouch may not completely seal the item for two reasons. First, the item might be too thick to laminate. In this case, pass it through the machine again. Second, the temperature setting may be incorrect if you are using manual operation. Try using the AutoSense setting, or verify that the pouch thickness is correctly selected and pass the item through the laminator again.
General| Preheating time | 4 min |
|---|---|
| Maximum document thickness | 0.25 mm |
| Standard media sizes | A3 |
Weight and Dimensions| Weight | 10510 g |
|---|---|
| Package depth | 292.00 mm |
| Package width | 730.00 mm |
| Package height | 252.00 mm |
| Package weight | 12060 g |
