To Next PageTo Next PageWhat to do if a Fellowes Voyager A3 pouch gets stuck?
If a pouch jams in the Fellowes Laminator, press the reverse button and gently pull the item out by hand. Alternatively, you can manually open the laminator via the LCD and follow the steps described in CleanMe to remove the jammed pouch.
How to fix no symbols showing in LCD screen of Fellowes Voyager A3 Laminator?
If there are no symbols on the LCD screen of your Fellowes Laminator, ensure the machine is switched on at the rear next to the plug inlet and at the wall socket. Then, press the standby button to the left of the LCD screen.
Why does my item come out the front of the Fellowes Voyager A3 again?
If the item comes out of the front of the Fellowes Laminator again, it is likely that the item is too thick to laminate. Try using a thinner pouch (80mic) and try again. Alternatively, you can photocopy the item and laminate the copy.
What to do if the ready screen does not come on after a long period on my Fellowes Laminator?
If the ready screen does not appear on your Fellowes Laminator after a long period, the machine may be in a hot or humid area. Move the machine to a cooler and dry environment.
Why does the Fellowes Voyager A3 machine speed and noise vary during lamination?
The machine speed and noise may vary during lamination because items of different thicknesses are being laminated. This is normal, as the automatic AutoSense adjustment guarantees optimum laminating conditions for varying items.
What to do if pouch is lost in my Fellowes Voyager A3?
If a pouch gets jammed in your Fellowes Laminator, press the reverse button and gently pull the item out manually. Alternatively, you can manually open the laminator via the LCD and follow the steps described in CleanMe.
How to stop Fellowes Voyager A3 when laminating?
To stop your Fellowes Laminator during lamination, press the “Reverse” button to eject the pouch, or press the “Left” button to return to the “home” menu screen.
What to do if pouch does not completely seal the item in Fellowes Voyager A3?
If your Fellowes Laminator pouch doesn't completely seal the item, it might be too thick. Try passing it through the machine again. Also, ensure the temperature setting is correct if you're using manual operation. Alternatively, use the AutoLam setting or verify that the pouch thickness is correctly selected, and then pass it through again.
What to do if item comes out the front of Fellowes Laminator again?
If the item comes out the front of your Fellowes Laminator, it means that the item is too thick to laminate. Choose a thinner pouch (80mic) and try again. You can also photocopy the item and laminate the copy.
What to do if pouch is damaged after lamination in Fellowes Voyager A3 Laminator?
If a pouch is damaged after lamination in your Fellowes Laminator, it may be due to damaged rollers or adhesive on the rollers. Open the laminator manually via the LCD and follow the steps described in CleanMe.
General| Preheating time | 4 min |
|---|---|
| Maximum document thickness | 0.25 mm |
| Standard media sizes | A3 |
Weight and Dimensions| Weight | 10510 g |
|---|---|
| Package depth | 292.00 mm |
| Package width | 730.00 mm |
| Package height | 252.00 mm |
| Package weight | 12060 g |
