To Next PageTo Next Page
Need help?Do you have a question about the FENDT 512 Vario S4 Profi and is the answer not in the manual?
Provides an introduction to safety instructions for tractor operation and maintenance.
Covers general safety precautions and disposal of materials during tractor maintenance.
Explains safety symbols and terms used throughout the manual to ensure clear understanding of warnings.
Details specific safety precautions and procedures for performing maintenance on the tractor.
Covers general procedures and warnings applicable to all service and maintenance tasks.
Instructions for opening and closing the tractor bonnet.
Procedures related to engine maintenance, including oil and filter checks and changes.
Maintenance tasks for the fuel system, including filter changes and bleeding.
Procedures for maintaining the tractor's air intake system, including filter replacement.
Guidance on cleaning and maintaining the tractor's cooling system components.
Instructions for checking the tractor's V-belt.
Maintenance procedures for the front Power Take-Off (PTO) unit.
Procedures for changing oil in the front axle differential and final drive hubs.
Maintenance steps for the transmission and axle drives, including oil level checks and changes.
Procedures for checking, draining, and filling hydraulic oil, and replacing filters.
Maintenance tasks related to the steering system and checking front wheel toe-in.
Instructions for general maintenance and filter changes in the heating and ventilation system.
Procedures for leak-testing and draining condensation from the compressed air system.
Maintenance of the air-conditioning system, including cleaning and V-belt tension.
Instructions for filling the windscreen washer fluid.
Maintenance for trailer hitch and towing equipment wear limits.
Information on three-point linkage wear limits.
Methods for cleaning various parts of the tractor, including the cab and terminal.
Covers maintenance and adjustments for electrical components and systems.
Information on fuse assignment and replacement.
Details on various warning and fault messages and how to clear them.
Specific information on fault messages related to the Variotronic Ti and implement control systems.
Comprehensive tables listing fault codes and their meanings for diagnosis.
Procedures and instructions for operating the tractor in emergency mode.
General technical specifications and data for the tractor.
Specific technical data related to the tractor's hydraulic equipment.
Information regarding tire pressures, wheel changes, and tire combinations.
Details on operating fluids, filling quantities, biodiesel, and AdBlue®.
A chart detailing lubrication points and filling points for the tractor.
Outlines the recommended maintenance schedule for the tractor.
Checklist and procedures for pre-delivery and pre-season inspections.
General
