EasyManua.ls Logo

FENDT 920 Vario - Checking Coolant Level

FENDT 920 Vario
267 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
158
CARE AND MAINTENANCE
16.3 Replacing the recirculating
air filter
Operation_Pic_number:1
Dismount air nozzles (right and left) and re-
move filter (A).
Fig.56
17. Air conditioning
Text-module
Switch on the air conditioning once a month
(even in winter) for about 10 minutes, setting the
ventilation to recirculated air mode (see OPERA-
TION Section 3.2).
Clean roof fan filter and recirculating air filter
(see CARE AND MAINTENANCE Section 16).
17.1 Condenser
Operation_Pic_number:1
If dirty, blow through or spray the condenser
(A) from the inside.
Checking coolant level
Operation_Pic_number:1
Switch on system. The compressor must also
be running. At an engine speed of 2,000 rpm;
white ball (A) in the sight glass of the fluid tank
must float.
Topping up with coolant or replacing the tank /
dryer can only be undertaken in the workshop.
NOTE:
The blue ball turning pink indicates moisture
in the system.
Fig.57
Fig.58

Table of Contents

Related product manuals