93
OPERATION
Lift speed
Operation_Pic_number:1
Rotary switch (P1) for setting the lift speed.
Lift speed is controlled electronically and can be
adjusted steplessly.
Positions of bar indicator (C).
right = Max. lift speed.
left = No lifting.
Lifting speed can be adjusted steplessly bet-
ween the two positions.
Front external controls
Operation_Pic_number:1
● The lifting gear can be raised or lowered
using buttons (A).
NOTE:
The maximum hydraulic oil flow rate is ap-
prox. 30 l/min.
If the safety lock is actuated,
External operation is possible at any position
of the Quick Lift switch.
Fig.210
Fig.211
DA/SA operation
Operation_Pic_number:1
● Turn lever (A) - see label.
NOTE:
Only use light implements (e.g. mowers)
which are loaded without pushing, in the SA
position.
Fig.212
To Next Page
Loading...
