FENDT 920 Vario - Function Display

52
OPERATION
Operation_Pic_number:1
Text-module
● Set maximum engine speed in Memory 1
(display A) with rotary control (P1).
● Set minimum engine speed in Memory 2 (dis-
play B) with rotary control (P2).
NOTE:
The maximum engine speed that can be set is
the engine limit speed.
The minimum engine speed that can be set is
the idle speed.
Activating engine control range
F1 = Engine control range active while dri-
ving.
F2 = Engine control range active when front/
rear PTO is engaged.
F3 = Engine control range active when hy-
draulic valve is actuated.
F4 = Engine control range active when lowe-
ring a front/rear power lift.
Function display
Operation_Pic_number:1
Different function displays appear on the main
menu page.
Engine control range active while
driving.
Fig.87
Fig.88
Text-module
NOTE:
Engine control is interrupted if the footbrake
or exhaust brake is actuated. After releasing
the footbrake, engine control is reactivated.
If the tractor is at a standstill and the trans-
mission is in neutral, the engine control for
the front/rear PTO or hydraulic valves or
front/rear power lift is active.
Engine control switches off, if the driver lea-
ves the driver seat for more than 3 seconds
while the tractor is driving and/or the trans-
mission is not in neutral.
Engine control range active while
driving or when front/rear PTO is
engaged or when a hydraulic valve
is actuated or when lowering
front/rear power lift.
Engine control range active when a
front/rear PTO is engaged or when a
hydraulic valve is actuated or when
lowering front/rear power lift.
Engine control range active when a
hydraulic valve is actuated or when
lowering front/rear power lift.
Engine control range active when
front/rear PTO is engaged or when
lowering front/rear power lift.
Engine control range active when
front/rear PTO is engaged or when a
hydraulic valve is actuated.
Engine control range active when
front/rear PTO is engaged.
Engine control range active when
hydraulic valve is actuated.
Engine control range active when
lowering a front/rear power lift.