FENDT Vario 716 - Default Chapter; Table of Contents

Table of Contents
Manual No. 016-5030-043 Rev. A i
Chapter 1 Important Safety Information................................................. 1
Electrical Safety ........................................................................................................................ 2
Chapter 2 Introduction............................................................................. 3
Preparing for Installation ........................................................................................................... 4
Recommendations .............................................................................................................. 4
Point of Reference ............................................................................................................... 4
Updates ..................................................................................................................................... 4
Kit Contents ............................................................................................................................... 5
Chapter 3 Mechanical Drive Installation ................................................ 9
Remove the Steering Wheel ..................................................................................................... 9
Install the Anti-Rotation Bracket .............................................................................................. 11
Install the Spline and Ring Gear Assemblies .......................................................................... 13
Reinstall the Steering Wheel ................................................................................................... 14
Install the Mechanical Drive .................................................................................................... 15
Chapter 4 Node and Wiring Installation ............................................... 19
Install the SmarTrax MD Node ................................................................................................ 19
Node Mounting Locations .................................................................................................. 19
Mount the SmarTrax MD Node .......................................................................................... 20
Install the Foot Switch ............................................................................................................. 21
Install the Node Harness ......................................................................................................... 22
Install the Chassis Cable - SmarTrax MD-Only Systems (If Applicable) ................................. 23
Connect SmarTrax MD to an Existing Chassis Cable (If Applicable) ...................................... 24