DUOX VEO XS MONITOR 19
FUNCTION
1. OPERATION: ANSWERING A CALL
a) "Hands-free" Mode:
When the call button on the Entry Panel is pressed a call tone sounds both on the panel
and on the monitor, causing the screen to start up. You have 30 seconds to answer
before returning to standby. During this time the red led turns off to know that the call
is pending being answered.
Press the button
to speak to the visitor. The audio channel between the entry panel
and the residence is opened; operating in hands-free mode. The blue led will light
up to indicate that it is in conversation with the street and all that is said is heard here.
The led will remain on (blue) for the duration of the conversation.
The communication facility will automatically terminate after 90 seconds, or at any time
by pressing the button
. When fi nished the blue led light again turns off and the
red light is turned on.
b) If confi gured in simplex conversation mode (press to talk and release to listen).
When the call button on the Entry Panel is pressed a call tone sounds both on the panel
and on the monitor, causing the screen to start up. You have 30 seconds to answer
before returning to standby. During this time the red led turns off to know that the call
is pending being answered.
Press the button
to speak to the visitor, leaving the upload audio channel activated.
The simplex mode is indicated by the fl ashing blue led light.
From this moment on, each time you press the button,
the output audio channel is
activated (fi xed blue led light) and when releasing it it activates the input audio channel
(blue fl ashing led light), the operation is in simplex mode.
The communication will automatically end after 90 seconds, or at any time by short
pressing the button
. When fi nished the blue led light again turns off and the red
light is turned on.
5.2 SETTINGS: AUDIO SETTINGS
While the audio channel is open the audio volume can be regulated. In order to set the
audio, press
(MENU) and a menu screen appears for this setting.