FERMOD KIT 5000 - 5 Characteristics

Kit5000_GB-A
- 5 -
5 - CHARACTERISTICS
AUTOMATIC ELECTRONIC KIT 5000
The automatic electronic kit 5000 is designed to motorize the Fermatic manual systems:
These manual systems are used for horizontal sliding doors with defined characteristics (iso-thermal,
acoustical, clean room, dust-tight…).
The automatic electronic kit 5000 has 5 function modes (see p 39):
Timer 1 mode•
Standard mode•
Timer 2 mode•
«Press and hold to close the door» mode•
«Press and hold to open/close the door» mode•
It has an integrated lock, a passive edgemount safety device and an horizontal safety device
(according to the regulations that apply in the country of installation).
Function modes
Options
Horizontal safety device • (according to the regulations that apply in the country of installation)
Flashing light•
Please contact us for other options (resistive edgemount, pull cord...).
Handles :
Every handle for Fermatic manual systems t on systems equiped with kit 5000.
2120
2130
2320
2150
2420
3430
3530
7530
Maxi door weight 60 Kg 80 Kg 120 Kg 150 Kg 200 Kg
Power supply 220-240V AC 400W Mono 50/60 Hz
Protection of the motor IP 55
Using temperature
-30°C to +50°C
(For negative temperature see «option for
minus temperature» - Separate mounting instructions)
2120 / 2130 / 2150 2320 / 2420 3430 3530 / 7530