Ferno XT - 7.4 Main Floats

35
© Ferno s.r.l. MU-086-G Rel.01102019
XT-Floating Extrication Device
7.4 MAIN FLOATS
1
2
3
Themainoatsarecontainedinacoverwithasleevethat
allows to connect them to a carrying belt.
Insert the shoulder fastening belt in the sleeve, starting from
thesidethatisclosertotheoatend.
Insert the female buckle on the belt; this buckle will be
closed onto the male buckle under the legs.
Connectthesecondoatinthesameway.
To complete the assembly, connect the free end of the
shoulderfasteningbelttothexingelementontheboard.
Warning!
Make sure that all three passages in the buckle are correctly
realised.