Ferno XT - 3.4 General specifications

8
© Ferno s.r.l. MU-086-G Rel.01102019
XT Extrication Device
The extrication device
3.4 General specications
Fernoreservestherighttochangethespecicationswithout
notice. For further details, please contact Ferno's Customer
Service (page 2).
XT
Materials
BoardXTcarbonbrecompositematerial
Quick Head Immobilizer polyurethane
Restraints nylon
Buckles plastic
Triangular head immobiliser and chin strap neoprene
Length 830 mm
Width 300 mm
Height 60 mm
Weight (including accessories) 2 kg
Load capacity 160 kg
XT Pro
Materials
BoardXTcarbonbrecompositematerial
Quick Head Immobilizer polyurethane
Restraints nylon
Buckles Aluminum 7075
Triangular head immobiliser and chin strap neoprene
Length 830 mm
Width 300 mm
Height 60 mm
Weight (including accessories) 3,4 kg
Load capacity 160 kg
XT Floating
Materials
BoardXTcarbonbrecompositematerial
Quick Head Immobilizer polyurethane
Restraints nylon
Buckles plastic
Triangular head immobiliser and chin strap neoprene
Length 1200 mm
Width 350 mm
Height 110 mm
Weight (including accessories) 3,3 kg
Load capacity 160 kg
Load capacity
Never exceed the load capacity of
the XT extrication device. Inspect the
extrication device if the load capacity
has been exceeded (see section
Inspection, page 44).
WARNING
Untrained users may injure themselves, cause
damage and/or physical harm. Allow only trained
and qualied sta to use the XT extrication device.
WARNING
Never exceed the load capacity of the extrication
device specied in this manual.
160 kg
352 lb