Operate the lever to activate:
- the exterior lights:
Position 0:
Lights off.
Position 1 (lever turned by one click):
Position lights and number plate lights on
(the relevant warning light also comes on)
and the instrument panel is backlit.
Position 2 (lever turned by two clicks):
Low beams on.
Position 3 (lever pushed forward):
High beams on (the relevant warning light
also comes on).
The high beams can only be switched on
with the lever in position 2.
- headlight ashing:
with the high beams, it is activated by
pulling the lever towards the steering
wheel.
The function can be activated with the lever
in any position.
To Next Page
Loading...
