be shown simultaneously on the multi-
function display: time and CST deactivated
symbol, low fuel symbol or RACE driving
mode.
Any other messages on the multi-function
display will be shown according to the
display sequence described earlier.
6 – Power window control
The power windows can only be used with
the ignition key in position II.
Driver-side power window control
It is operated by pressing the button to the
left of the car stereo system.
This button allows manual operation
(partial opening/closing) or automatic
operation (complete opening/closing):
press the button brie y to activate manual
operation; hold the button down for a
longer time (more than 0.3 seconds) to
activate automatic operation so that the
window stops when it reaches the end of its
travel, or press the button a second time.
Passenger-side power window control
It is activated by pressing the button to the
right of the car stereo system
This button allows only manual operation:
when the button is released, the window
stops at the position reached.
The window can move up to the “target”
position in order to prevent the door from
colliding with the upper weather strip when
closing it.
Improper use of the power window
controls can be dangerous. Before
use, always check that people and objects
are at a safe distance.
Pay particular attention during automatic
operation of the driver-side power window.
To protect the passengers remaining seated
in the vehicle against accidental activation
of the power windows, always remove the
key from the ignition block.
To Next Page
Loading...
