EasyManua.ls Logo

Ferrari F430 - Page 53

Ferrari F430
134 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Unfastening the seat belts
Push the release button E.
Guide the belt hooking tongue A back to
its rest position.
Load limiting devices
In the event of impacts at high speeds,
with sharp deceleration, the load
limiting device progressively releases the
belt when the tension value reaches a
prede ned threshold. This action reduces
the possibility of injury to the chest and
shoulders of the occupant.
Pretensioners
The pretensioner is activated in the event
of a violent head-on collision. The belt will
rewind by a few centimetres a moment
before the restraining action begins,
thereby ensuring perfect tightness across
the body.
Activation of the pretensioner is indicated
by the relevant warning light on the
instrument panel coming on and by the seat
belt locking.
After activation, the pretensioner
ceases to function and it cannot be
repaired under any circumstances. Please
contact the Ferrari Service Network to
have it replaced.
When the pretensioner is activated, a small
amount of powder is released. This powder
is not harmful and does not indicate the
start of a re.
Maintenance of the seat belts and
pretensioners
Following a collision of a certain impact,
replace the seat belts that were worn at
the time even if they may not appear to
be damaged.
Periodically check that the screws on the
anchoring points are tight and that the
belt is intact and slides smoothly.
The belt must be kept clean; any dirt on
the belt could jeopardise the ef ciency of
the belt winder.
To clean the seat belt, wash it by hand
with mild soap and water and let it dry.
Do not use strong detergents, bleach or
aggressive solvents, as they can weaken
the  bres.
Do not let the belt winders get wet:
proper functioning is guaranteed only if
they are kept dry.
The pretensioner requires no
maintenance or lubrication.
If immersed in water or mud, the
pretensioner must necessarily be replaced.
The pretensioner must be replaced at
the intervals speci ed in the “Warranty
Booklet and Service Time Schedule”.
All work on any part of the safety
system components must be carried
out by the Ferrari Service Network
.
It is not permitted to remove or make
modi cations of any kind to the seat belts, belt
winders and pretensioners.

Table of Contents

Related product manuals