• Fit the new bulb by pushing it into
place in the bulb holder and turning it
clockwise.
• Reposition the bulb holder in its seat and
turn it clockwise until it locks.
• To access the position light bulb remove
the protective cap C.
• Remove the bulb holder D and remove it
from its seat.
• Remove the bulb E of the position light
and replace it.
Replacing the side direction indicator bulb
• First remove the indicator transparent
cover A and then the bulb holder
B, being careful not to damage the
bodywork.
• Remove the bulb C removing it from the
bulb holder.
• Replace the bulb and re t the bulb
holder and then the plastic cover.