EasyManuals Logo

Ferris IS600z series User Manual

Ferris IS600z series
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #20 background imageLoading...
Page #20 background image
Not for
Reproduction
20 ferrismowers.com
PTO (Power Take Off) Switch: The PTO switch
engages and disengages the mower blades. Pull UP on the
switch to engage, and push DOWN to disengage.
Ignition Switch: The ignition switch starts and stops the
engine, it has three positions:
OFF: Stops the engine and shuts off the
electrical system.
RUN: Allows the engine to run and powers the
electrical system.
START: Cranks the engine for starting.
Note:Never leave the ignition switch in the RUN position with
the engine stopped—this drains the battery.
Throttle Control: The throttle controls engine speed. Move
the throttle forward to increase engine speed and back to
decrease engine speed. Always operate at FULL throttle
when mowing.
Fast throttle speed. Slow throttle speed.
Hour Meter: This unit is equipped with a dual function hour
meter that records the number of hours that the engine has
run and the number of hours that the PTO switch has been
engaged.
"A" - Hour Glass Icon - The hour glass icon flashes when
the hour meter is recording the passage of time.
"B" - Mode Icon - The mode icon will display an "E" when
displaying engine hours, and a "P" when displaying PTO
hours.
"C" - Time Display - This is the number of hours that are
recorded.
The default display of the hour meter is engine hours. The
mode icon will display a "E" and the hour glass icon will not
flash.
To begin recording engine hours, start the unit's engine and
release the parking brake. The hour glass icon will flash.
To begin recording PTO hours, pull the PTO switch up to
engage the PTO clutch. The unit's engine must be running.
The mode icon will display a "P" and the hour glass icon will
flash.
While recording PTO hours, the hour meter also records
engine hours; however, the hour meter only displays PTO
hours when recording PTO hours.
To stop recording PTO hours, push the PTO switch down to
disengage the PTO clutch.
To stop recording engine hours, engage the parking brake.
The hour meter has a self contained power source so that the
recorded hours are always visible even when the engine is
OFF.
Operation
Before First Time Operation
Be sure to read all information in the Safety and
Operation sections before attempting to operate this
tractor and mower.
Become familiar with all of the controls and how to stop
the unit.
Drive in an open area without mowing to become
accustomed to the unit.
WARNING
Never operate on slopes greater than 15°.
Select slow ground speed before driving onto a slope.
Use extra caution when operating on slopes with a rear-
mounted grass catcher.
Mow across the face of slopes, not up and down, use
caution when changing direction on slopes anddo NOT
start or stop on a slope.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ferris IS600z series and is the answer not in the manual?

Ferris IS600z series Specifications

General IconGeneral
Fuel Capacity5 gallons
Turning RadiusZero-turn
Engine BrandKawasaki
Cutting Width61 inches
Deck ConstructionFabricated Steel
EngineV-Twin
Speed10 mph
Wheel Size20 inches rear
Warranty4-Year limited (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months).

Related product manuals