Festo CMMS-AS G2 Series Assembly And Installation

CMMS-AS-...-G2
Festo – GDCP-CMMS-AS-G2-HW-EN – 1310NH – English 7
Documentation
Information regarding the motor controller can be found in the following documentation:
Name, type
Contents
Description of hardware,
GDCP-CMMS-AS-G2-HW-...
Assembly, installation, pin allocation and error messages
Description of the STO safety
function, GDCP-CMMS-AS-G2-S1-...
Functional safety engineering for the motor controller with the
STO safety function
Description of function,
GDCP-CMMS-AS-G2-FW-...
– Functional description and commissioning with FCT
– Control interfaces and device profiles
Description of device profile FHPP,
P.BE-CMM-FHPP-SW-...
Control and parameterisation of the motor c ontroller via the
device profile FHPP from Festo
Description
Device profile CiA 402,
P.BE-CMMS-FHPP-CO-SW-...
– Description of the CAN interface of the motor controller
– Control and parameterisation of the motor controller via the
device profile CiA 402 (DS 402)
PROFIBUS description,
P.BE-CMM-FHPP-PB-SW-...
Description of the PROF IBUS interface of the motor controller
DeviceNet description,
P.BE-CMMS-FHPP-DN-SW-...
Description of the DeviceNet interface of the motor controller
Help on the FCT plug-in CMMS-AS User interface and functions of the CMMS-AS plug-in for the
Festo Configuration Tool  www.festo.com
Tab. 2 Documentation for the motor c ontroller CMMS-A S -...-G2

Festo CMMS-AS G2 Series Specifications

General

Brand	Festo
Model	CMMS-AS G2 Series
Category	Controller
Language	English