Festo CMMS-AS G2 Series Assembly And Installation

1 Safety and requirements for product use
Festo – GDCP-CMMS-AS-G2-HW-EN – 1310NH – English 9
1.1.2 Intended u s e
The motor controller CMMS-A S -...-G2. is a digital positioning c ontroller for servo motors for
– supply and activation o f t he motor
– regulation of speed (current), torque and position.
The motor controller supports the following safety function:
– “Safe Torque Off ” (STO)
Category 3/PL d in accordance with EN ISO 13849-1.
Use exclusively:
– in faultless technical condition
– in original status, without unauthorised modifications
– within the limits of the product defined by the technical data ( Appendix A.1)
– in an industrial environment
– as an installed device in a control cabinet.
In the event of damage caused by unauthorised manipulation or other than intended use,
the guarantee is invalidated and the manufacturer is not liable for damages.

Festo CMMS-AS G2 Series Specifications

General

Brand	Festo
Model	CMMS-AS G2 Series
Category	Controller
Language	English