Festo CMMS-ST-C8-7-G2 Mounting And Installation

CMMS-ST-C8-7-G2
Festo – GDCP-CMMS-ST-G2-HW-EN – 1404NH – English 5
Notes on this documentation
This documentation is intended to help you safely work with the motor controller CMMS-ST-C8-7-G2
and describes the functions, commissioning and error messages.
Target group
This documentation is intended exc lusively for technicians trained in c ontrol and automation techno-
logy, who have experience in installation, commissioning, programming and diagnostics of positioning
systems.
Versions
This documentation refers to the following versions:
– Motor controller CMMS-ST-C8-7-G2: from Rev 05
Please note
Before using a newer firmware version, c hec k whether a newer version of the FCT plug-
in or user documentation is available for it ( www.festo.c om/sp).
servicing
Please c onsult your regional Festo contact if you have any technical problems.
Product identification
Rating plate CMMS-ST-C8-7-G2
Function
…
CMMS-ST-C8-7-G2
572211
CN98 P0021912
Rev 06
In: 1 48V DC 5.5A
Out:
2 (0…to Input Voltage) V DC
(0…10)kHz 8A
___
---
___
---
Type designation CMMS-ST-C8-7-G2
Part number e.g. 572211
Revision status e.g. Rev 06
Serial number e.g. CN98 P0021912
Input (In) 1-phase
48 V DC, 5.5 A
Output (Out) 2-phase
0 … Input voltage V DC
0…10kHz,8A
Tab. 1 Rating plate CMMS-ST-C8-7-G2 (example)
Issue status of the specified standards
Standard: issue status
EN 60204-1:2006/A1:2009-02 EN 61800-3:2004-12 + A1:2012-03
EN 61800-2:1998-04 EN 61800-5-1:2007-09
Tab. 2 Issue statuses

Festo CMMS-ST-C8-7-G2 Specifications

General

Brand	Festo
Model	CMMS-ST-C8-7-G2
Category	Controller
Language	English