Festo CPX-CMAX-C1-1 Brief Description

Festo CPX-CMAX-C1-1 2019-02a English
5
3 Installation instructions
3.1 Note on replacing the CMAX module
All project-related parameters are stored in the CMAX
module. Perform commissioning again with the Festo
Configuration Tool; see system manual for the CMAX.
You can find the current version in the Internet under:
è www.festo.com → Downloads → Download Area: Soft
ware, drivers and firmware → Enter search term: CMAX
3.2 Mounting
The CMAX is mounted in an interlinking block of the CPX
terminal.
1 Screws,
Tightening torque
0.9 … 1.1 Nm
2 CMAX
3 Interlinking block
with contact rails
3
1
2

Festo CPX-CMAX-C1-1 Specifications

General

Brand	Festo
Model	CPX-CMAX-C1-1
Category	Controller
Language	English