EasyManua.ls Logo

Fetco CBS-1221 - A PROGRAM - Batch Parameters

Fetco CBS-1221
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Go to fetco.com for the latest versions of all information Page 5 User Guide & Operator instructions P194Re0 November 2020
A
PROGRAM Menu Features: Batch Parameters
The settings below are shown for the top batch on a single brewer top left button on a twin brewer.
See how to access all A menus on the previous page. Below are the brew settings for default A1 & A2 batches
POSITION Program Items Factory set Default Programming Range Increments Notes
A11 Batch Volume
2.20liters
0.58
g
al
0.95 to 3.25L
0.25 to 0.85
g
al
0.05L
0.01G
Unit software is in liters;
Can convert to
g
allon
A12
Brew Time
(MIN:SEC)
4:00 minutes 2:00 – 12:00 15 sec
Default total brew time is
6:00 minutes
A13 Prewet Perc. 0% 0.00 – 25.0% 1%
Percentage of total brew
volume
A14
Prewet Delay
(Pause after prewet
completes)
0% [1:00 Min] [0:10 – 5:00] 10 sec
The time between
prewetting and start of
brew cycle.
This feature appears
ONLY if Prewet >0:00
A16 Drip Delay 2:00 mm:ss 0:30 – 6:00 min. 10 sec
Time brew basket should
remain in place during final
drip-out
Drip delay remains “ON”
for 2:00 minutes if STOP is
pressed during brew
A20
Batch Enabled
A20 YES -
NO +
YES
(Active)
Middle and Bottom
batches A2,A3
Batch on
or off
Batches may be
individually enabled,
rewritten or deactivated
A21 Batch Volume
2.20liters
0.58
g
al
0.95 to 3.25L
0.25 to 0.85
g
al
0.05L
0.01G
Unit software is in liters;
converts to
g
allon
A22
Brew Time
(MIN:SEC)
4:00 minutes 2:00 – 12:00 15 sec
Default total brew time is
6:00 minutes
A23 Prewet Perc. 0% 0.00 – 25.0% 1%
Percentage of total brew
volume
A24
Prewet Delay
(Brew pause after
prewet completes)
0% [1:00 Min] [0:10 – 5:00] 10 sec See Note A14
A
26 Drip Dela
y
2:00 mm:ss 0:30
6:00 min. 10 sec
See Note A16
A30
Batch Enabled
A30 YES -
NO +
YES
(Active)
Middle and Bottom
batches A2,A3
Batch on
or off
Batches may be
individually enabled,
rewritten or deactivated
A31 Batch Volume
2.20liters
0.58
g
al
0.95 to 3.25L
0.25 to 0.85
g
al
0.05L
0.01G
Unit software is in liters;
converts to
g
allon
A32 Brew Time (MIN:SEC) 4:00 minutes 2:00 – 12:00 15 sec
Default total brew time is
6:00 minutes
A33 Prewet Perc. 0% 0.00 – 25.0% 1%
Percentage of total brew
volume
A34
Prewet Delay
(Brew pause after prewet
completes)
0% [1:00 Min] [0:10 – 5:00] 10 sec See Note A14
A
36 Drip Dela
y
2:00 mm:ss 0:30
6:00 min. 10 sec
See Note A16
A70
Batch Copy
Copy From Batch A71 A71 1 (1-6)
A72
(PASTE TO)
Copy To Batch? A72 A72.1 (1-6)
A11 Single Topmost Batch cannot be disabled. A21 & A31 middle and bottom batches may be disabled.
† DRIP DELAY will not activate when STOP is pressed within 5 seconds of startin
g
a brew time
.

Related product manuals