23
Configuration - F-Relay
The operation of the F-relay AC and DC must be specified with the
option switch F-Relay; the following operations are available.
Off Both F-relays remain permanently switched off.
AC:Ringer The F-relay AC signals an incoming call and switches on and off in the
rhythm of the call voltage, without call pause bridging.
AC:Off Hook The F-relay AC signals the busy status of the telephone and is on as
long as the telephone occupies the TIP/RING-line.
DC:Ringer The F-relay DC signals an incoming call and switches on and off in the
rhythm of the call voltage, without call pause bridging.
DC:Off Hook The F-relay DC signals the busy state of the telephone and is switched
on as long as the telephone occupies the TIP/RING-line.
Factory setting:
F-Relay......................................... Off // both relays permanently switched off.
Configuration - Menu
The menu contains the following elements with which the illustration in
the display of the telephone must be specified.
Language Options switch for specifying the language.
Welcome Text Entry element for specifying the greeting text, which is depicted initially
in the display, if the telephone changes to one of the conversation-
operations.
LCD Contrast Sliding controller for specifying the display contrast.
Factory setting:
Language...............................English // standard setting
Welcome Text………………….."":32 // standard setting
LCD Contrast ...................................5 // standard setting
Configuration - Fact. Settings
With the action switch Fact. Settings, the factory setting of the
configuration are reset.
Notes:
The following elements of the configuration remain unaffected by the
resetting of the factory settings.
S 21, Configuration - Phone Book
S 23, Configuration - Menu\Language
S 24, Configuration - PIN
To Next Page
Loading...