EasyManua.ls Logo

FHF ExResistTel - Service; Service - Maintenance; Service - Waste Disposal

FHF ExResistTel
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
1
The alarm volume is automatically reduced in the case of a weak call signal. For an
emission with maximum volume, the call signal must fulfill the following conditions
V
Ringer
62 V
AC
& f
Ringer
30 Hz.
2
The hands-free is influenced by ambient noise, an undisturbed conversation is not
possible at ambient noise levels 68 dB(A).
3
Achieved with the help of speech funnels
4
In accordance with UL50
5
In accordance with IEC 50598
6
The function of the display is limited at temperatures below -4°F / – 20 °C.
Standards and regulations (Conformity to the following standards and regulations)
Radio frequency devices
FCC PART 15
Hearing Aid Compatibility
FCC PART 68
Telecommunications Telephone Terminal
Equipment: Technical Requirements for Connec-
tion of Terminal Equipment to the Telephone
Network
TIA-968-B
Enclosures for Electrical Equipment
UL 50, UL 50E
Information Technology Equipment – Safety
UL 60950-1, UL 60950-22
Nonincendive Electrical Equipment for Use in
Class I and II, Division 2 and Class III, Division 1
and 2 Hazardous (Classified) Locations.
ANSI/ISA-12.12.01-2011
Service
You have purchased a state-of-the-art product, which is subject to strin-
gent quality controls. If you have questions regarding the telephone or if
a malfunction has occurred even after the guarantee period please
contact your supplier or manufacturers representative.
Service – maintenance
The telephone is maintenance-free. Nevertheless, if the telephone is
deployed in areas with significant impurities due to dust, grease, oil etc.,
then it should be cleaned from time to time. The handset and the tele-
phone should be wiped with a damp cleaning cloth. Caution! Never use
sharp objects for cleaning.
Service – waste disposal
The device may be completely recycled as electronic waste. Upon dis-
assembling the device, the plastic, metal and electronic components
must be disposed of separately.
In every single case, the local requirements and regulations for waste
disposal must be observed.

Related product manuals