30 Nero Testo 603.46.306 Radio Stilo gb
RADIO WITH CASSETTE PLAYER
30
Scanning tracks (Scan function)
With this function it is possible to
listen to all the cassette tracks for
about 10 seconds, provided that
between one track and the other
there is a pause/muting of about 4
seconds.
Keep the 7 (SCAN) button
pressed; while playing the track and
searching the start of the next track,
the display will show “TAPE
SCAN”.
Press the 7 (SCAN) button again
to interrupt scanning while listening
to a track: the cassette will be played
starting from that track.
The scanning sequence is the fol-
lowing:
– from the track played up to the
end of the tracks on the same side of
the tape
– playing side change and scanning of
all the tracks on that side
– changing again the playing side and
scanning all the tracks on that side.
After playing the tracks the function
goes off.
The SCAN function is interrupted
in the following cases:
– turning the set off
– press 7 (SCAN) again to contin-
ue listening to the track being played
– turning the Pause function on
Ejecting the cassette
To eject the cassette, press 1 (
Ä
)
with the set on. The display shows
“TAPE EJECT”.
After ejecting the cassette, the
source heard before playing the cas-
sette will be resumed.
The cassette cannot be ejected if
the radio is off.
Pause function
To pause the cassette player, briefly
press (less than 1 second) the 2 (II
MUTE) button. The display will
show “TAPE PAUSED”.
To listen to the track again, press
again 2 (II MUTE).
AMS function
AMS = Automatic Music Search
This function enables to play auto-
matically the next/previous track
provided that between the two
tracks there is a pause/muting of
about 4 seconds.
During fast forward/rewind the dis-
play shows “TAPE <<AMS>>”.
The AMS function is interrupted in
the following cases:
– When the sound source is
changed
– When the cassette is ejected
– When the direction of the tape is
reversed
– When the set is turned off
To Next Page
Loading...
Need help?
General
