FIBARO FGCD-001 - 1: Description and Features

3
DESCRIPTION AND FEATURES
Main features of FIBARO CO Sensor:
• compatible with any Z-Wave or Z-Wave+ Controller
• supports protected mode (Z-Wave network security mode) with
AES-128 encryption
• wall-mounted
• battery-powered
• completely wireless
• alarm signalled with a built-in siren and LED diode
• built-in temperature sensor
FIBARO CO Sensor is an ultra-light, compact, battery-powered
carbon monoxide detector, designed to be placed on a wall.
Its high sensitivity allows to detect the presence of the carbon
monoxide (CO) gas at the early stage in order to prevent carbon
monoxide poisoning.
Alarm is signalled with a built-in siren, blinking LED indicator and by
sending commands to Z-Wave network devices.
Additionally, the device is equipped with a temperature sensor.
#1: Description and features
FIBARO CO Sensor is a fully
compatible Z-Wave PLUS device.
NOTE
This device may be
used with all de-
vices certied with
the Z-Wave Plus cer-
ticate and should be
compatible with such
devices produced by
other manufacturers.
i
NOTE
FIBARO CO Sensor is a
Security Enabled
Z-Wave Plus product
and a Security Ena-
bled Z-Wave Control-
ler must be used in or-
der to fully utilize the
product.
i