EasyManua.ls Logo

FIBARO FGCD-001 - 4: Physical Installation

FIBARO FGCD-001
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
PHYSICAL INSTALLATION
#4: Physical installation
Place of installation:
1. Mount the cover on a wall.
2. Attach the device to its cover.
3. Turn the device clockwise to close it.
READ BEFORE INSTALLATION
AND HEED ALL THE WARNINGS!
The device should be installed below the ceiling level.
The device should be installed on the wall, at least 30 cm (1 ft) away
from the corners.
The device should not be installed: in a bathroom, next to heat
sources, within range of kids, obstructed from possible carbon
monoxide sources, in direct sunlight.
The device should be installed by a qualied installator.
Do not paint the device.
The device should be cleaned with a slightly damp cloth or mois-
tened tissue.
!
CEILING
FLOOR
NOT HERE
HERE
30cm/1ft
1.5m/5ft
WALL
Installation on the wall:
1.
2.
3.
NOTE
Recommended height
of installation is de-
pendant on the pur-
pose of the room and
height at which head
typically is.
i

Related product manuals