2 3
DESCRIPTION AND FEATURES
Main features of FIBARO KeyFob:
• Compatible with any Z-Wave or Z-Wave Plus Controller
• Supporting Z-Wave network Security Mode with AES-128
encryption
• Battery powered
• Completely wireless
• Being pocket size
• Equipped with 6 easily recognizable buttons
• Having 30 dierent actions, single/double/triple click, hold for
each button and sequences
• Easy to operate menu
• Conrming actions with the built-in LED diode.
FIBARO KeyFob is a Z-Wave Plus compatible, battery-powered,
compact remote control.
Six buttons allow you to control other devices through the Z-Wave
network and run various scenes dened in FIBARO System.
Congure actions for one, two, three clicks, holding the button and
button sequences to suit all your needs.
Built-in locking system ensures that unauthorized person won't take
control of your home.
#1: Description and features
FIBARO KeyFob is a fully compatible
Z-Wave Plus device.
NOTE
This device can be
used with all de-
vices certied with
the Z-Wave Plus cer-
ticate and should be
compatible with such
devices produced by
other manufacturers.
i
NOTE
Z-Wave Controller
must support Z-Wave
Security Mode in
order to fully utilize the
product.
i
Important safety information
Read this manual before attempting to install the de-
vice!
Failure to observe recommendations included in this manual may be
dangerous or cause a violation of the law. The manufacturer, Nice-Pol-
ska Sp. z o.o. will not be held responsible for any loss or damage re-
sulting from not following the instructions of operating manual.
The alarm functionality of devices is an additional feature increasing
the comfort level of your home automation system. If you want to
use professional security service, please contact them to determine
what systems can provide a protection of your estate.
Not a toy!
!
This product is not a toy. Keep away from children and animals!
Compliance with safety standards:
The device is designed to be used in Z-Wave home automation sys-
tems (e.g. FIBARO) and is complaint with IEC/UL/CSA 60950-1. In case
of the integration with another system, e.g. alarm system, it is re-
quired to verify the compliance with additional standards.
!
General information about
the FIBARO System
FIBARO is a wireless smart home automation system, based on the
Z-Wave protocol. All of available devices can be controlled through a
computer, smartphone or tablet. Z-Wave devices aren't only receivers,
but can also repeat the signal, increasing the Z-Wave network range.
It gives advantage over traditional wireless systems that require direct
link between transmitter and receiver, as a result the construction of
the building could aect network range negatively.
Every Z-Wave network has its unique identication number (home
ID). Multiple independent networks can exist in the building without
interfering. Transmission security of FIBARO System is comparable to
wired systems.
Z-Wave technology is the leading solution in smart home automation.
There is a wide range of Z-Wave devices that are mutually
compatible, independently of manufacturer. It gives the system the
ability to evolve and expand over time. For more information visit
www.baro.com.