FIBARO FGKF-601 User Manual

16 17
ADVANCED PARAMETERS
ADVANCED PARAMETERS
4. Second scene sequence
This parameter enables setting up sequence that activates scene
with ID 8. See "Sequences" on page 10 for more information.
Available settings: 0 - 2nd sequence disabled
9-28086 - value of sequence
Default setting:
0
Parameter size: 2 [bytes]
5. Third scene sequence
This parameter enables setting up sequence that activates scene
with ID 9. See "Sequences" on page 10 for more information.
Available settings: 0 - 3rd sequence disabled
9-28086 - value of sequence
Default setting:
0
Parameter size: 2 [bytes]
6. Fourth scene sequence
This parameter enables setting up sequence that activates scene
with ID 10. See "Sequences" on page 10 for more information.
Available settings: 0 - 4th sequence disabled
9-28086 - value of sequence
Default setting:
0
Parameter size: 2 [bytes]
7. Fifth scene sequence
This parameter enables setting up sequence that activates scene
with ID 11. See "Sequences" on page 10 for more information.
Available settings: 0 - 5th sequence disabled
9-28086 - value of sequence
Default setting:
0
Parameter size: 2 [bytes]
8. Sixth scene sequence
This parameter enables setting up sequence that activates scene
with ID 12. See "Sequences" on page 10 for more information.
Available settings: 0 - 6th sequence disabled
9-28086 - value of sequence
Default setting:
0
Parameter size: 2 [bytes]
9. Sequences - timeout
This parameter enables setting time that must elapse from the last
click of the button to check if the sequence is valid.
Available settings: 5-30 (0.5-3s, 0.1s step) - time to lock
Default setting: 10 (1 s) Parameter size: 1 [byte]
10. Single button associations - operating mode
This parameter enables choosing operating mode for single button
associations.
Available settings: 0 - single click switches state to opposite
1 - single click switches state to opposite, dou-
ble click sets to maximum level
2 - single click turns on, double click turns o
Default setting: 0
(switch) Parameter size: 1 [byte]
11. Value sent to association groups
12. Value sent to
association groups
13. Value sent to
association groups
14. Value sent to
association groups
15. Value sent to
association groups
16. Value sent to
association groups
This parameter enables setting value sent to devices in the associa-
tion group. It results in turning multilevel devices on with set or last
level. Value is irrelevant for simple on/o devices.
Available settings: 1-99 or 255
Default setting:
255
Parameter size: 2 [bytes]
17. Paired buttons association for
and
This parameter enables activating paired buttons association mode
for
and buttons. Paired buttons are dependent and association
are sent only to
groups. turns devices on and increases value,
turns them o and decreases value.
Available settings: 0 - paired buttons association inactive
1 - paired buttons association active
Default setting: 0 (inactive) Parameter size: 1 [byte]
18. Paired buttons association for
and
This parameter enables activating paired buttons association mode
for
and buttons. Paired buttons are dependent and association
are sent only to
groups. turns devices on and increases value,
turns them o and decreases value.
Available settings: 0 - paired buttons association inactive
1 - paired buttons association active
Default setting: 0 (inactive) Parameter size: 1 [byte]
NOTE
Setting parameters
11-16 to appropriate
value will result in:
1-99 - forcing level of
associated devices
255 - setting associat-
ed devices to the last
remembered state or
turning them on
i

FIBARO FGKF-601 Specifications

General

Brand	FIBARO
Model	FGKF-601
Category	Remote Control
Language	English