To Next PageTo Next Page
Need help?Do you have a question about the FieldServer ProtoCessor ProtoNode RER Series and is the answer not in the manual?
General| Brand | FieldServer |
|---|---|
| Model | ProtoCessor ProtoNode RER Series |
| Category | Gateway |
| Language | English |
Explains the BTL mark as an indicator of BACnet feature compliance and quality.
Describes LonMark International's role in certifying interoperability standards.
Lists the key features of the ProtoNode RER and LER devices.
Outlines the sequential steps for installing the ProtoNode unit.
Instructions on recording the unique part number for technical support.
Guides users on setting DIP switches for node ID, device instance, and serial baud rates.
Explains using DIP switches to select and load pre-configured files from the OEM.
Illustrates and describes the various connection ports on the ProtoNode devices.
Details the pinouts and general wiring for the ProtoNode's connectors.
Specific instructions for connecting the ProtoNode RER to an RS-485 field protocol.
Specific instructions for connecting the ProtoNode LER to a LonWorks network.
Steps for safely applying power to the ProtoNode RER or LER.
Process for commissioning the ProtoNode-LER on a LonWorks network.
Steps to establish an Ethernet connection between the PC and ProtoNode.
Instructions on how to open and navigate the ProtoNode's web-based graphical user interface.
Guide for setting the IP address for BACnet/IP communication.
Basic troubleshooting steps involving wiring and configuration settings.
How to use FieldServer utilities to capture logs for diagnosing problems.
Explains the meaning of LEDs on the ProtoNode for diagnosing operational status.
Details on accessing and using internal DIP switches for advanced configuration.
Lists the detailed technical specifications of the ProtoNode RER and LER.
Table showing DIP switch configurations for device addresses.
