FieldServer LonWorks ProtoNode - User Manual

Part Number: 106417-05 Rev A, 7/24
Universal Gateway
LonWorks ProtoNode
Instruction Manual
Contents
1. Introduction
5
2. Setup
7
3. Wiring
11
4. Initial Connection to ProtoNode
25
5. Setup Web Server Security
28
6. Setup ProtoNode
32
7. Setup Energy Management
System Network
37
8. Troubleshooting
40
9. Additional Information
45
10. ProtoNode Information
50
11. Installation Details
52
12. LonWorks Points List
55
Appendix
A. “A” Bank DIP Switch Settings
80
B. Grid Field Server Manager Setup
83
Application
The Universal Gateway (LonWorks ProtoNode) provides
monitoring, remote setpoint, firing rate and burner on/off control
to the Energy Management Systems/ Building Automation
System/ Building Management System (EMS). The Universal
Gateway ProtoNode is compatible with the following brands and
models:
Burnham Commercial Models: Products using Sage Boiler
Control (SBC™)
Bryan Boilers Models: BFIT, FreeFlex, boilers using following
control components: RWF40, RWF55, RM7800, LMV36,
LMV52, PD765, LMV2_3, YB110
Thermal Solutions Models: APEX, AMP, Evolution, Arctic,
Conductor
U.S. Boiler Company Models: Alpine, ASPEN, ALTA, Citadel
Velocity Boiler Works Models: Phantom-X, Raptor, Phantom
II, Phantom-XL
There are two Universal Gateway options:
ProtoAir: Provides BACnet MS/TP, BACnet/IP, N2, Modbus
TCP communications, refer to “Universal Gateway ProtoAir”
Instruction Manual.
LonWorks ProtoNode: Provides LonWorks communication.
Intent
This document provides the necessary information to facilitate
Gateway installation. This Instruction Manual includes practical,
installation and setup detailed information. The intended users
are contractors and factory support personnel.
FPC-N35-0817
LonWorks ProtoNodes

FieldServer LonWorks ProtoNode Specifications