Page 28 of 97 PN: 106417-05
4.3 Connecting to the ProtoNode Web Configurator
After setting a local PC on the same subnet as the ProtoNode (Section 4.1), open a PC web browser, and
enter the IP address of the ProtoNode (default: 192.168.1.24)
NOTICE: If the IP Address of the ProtoNode was changed, the assigned IP Address can be
discovered using the FS Toolbox utility.
• Username: admin
• Password is printed on label of ProtoNode and should be located on the cover by the
Ethernet port
To Next Page
Loading...
