Fike FVA-IP - Operator Features

FVA-IP Camera Installation and Operation Manual
Revision Date: June, 2019 P/N 06-523 (Rev. 5) 17
3.4 OperatorFeatures
ThefirstfeatureontheoperatorlististheCameraStatus,Figure9.Thistableprovidestheoperatorthestateofeach
alarmandtroublecondition.Italsoallowstheoperatortoswitchthestateandturnonanyofthealarmortrouble
statesfortestingpurposes.Turninganyofthestates“on”resultsinaneventfilebeingcreatedandrecordedandany
dry contacts that are set to close on the event type would close.Thisfeatureisgoodfortestingthecamera’s
functionalityorrecordingeventsthatarenondetectablebytheanalytics(i.e.fighting,theft,breachofprotocol,etc.).
Theoverridewillcontinueuntiltheoperatorreturnsthefunctiontooff.


Fig9–Cameraalgorithmstatusandoverridefeatures
TheLiveVideofeatureallowsfortheoperatortoviewthevideofeedproducedbytheFVA‐IPcamera.Thevideocan
beseenusingtheJAVAAppletorMultipartStream(FireFoxonly),Figure10.


Fig10–LivevideothougheitherJavaAppletorMultipartStream(FireFoxonly).
