To Next Page
V
Valerie WilliamsSep 13, 2025
How to avoid lateral indentations with Fimer TM360W?
- TTonya WilsonSep 14, 2025
Lateral indentations can be caused by excessive welding speed. Decrease the welding speed to avoid this.
How to avoid lateral indentations with Fimer TM360W?
Lateral indentations can be caused by excessive welding speed. Decrease the welding speed to avoid this.
Important safety precautions and general warnings for using the equipment.
Safety measures for the welder and bystanders during operation.
Precautions to prevent fires during welding operations.
Instructions for connecting the welding machine to the power supply.
How to connect welding cables and torch to the machine.
Identification and description of front panel controls and connectors.
How to adjust wire feeder rolls for different wire diameters.
Procedure for connecting the trolley to the machine base.
Steps and safety precautions for connecting gas cylinders.
Checking and maintaining the welding torch for optimal performance.
Ensuring correct connections and polarity before starting welding.
Table and guide for selecting correct welding current based on material thickness.
Tips on torch angle, movement, and environmental factors for quality welds.
How to adjust wire speed for optimal welding results based on sound.
Table listing common defects and their causes and solutions.
Step-by-step guide for replacing the wire liner in the torch.
Detailed steps for connecting the cooling system components.
Visual identification of major spare parts within the machine.
Schematic representation of electrical components for TM230/TM260.
Schematic representation of electrical components for TM300.
Schematic representation of electrical components for TM350/320W/360W.
Schematic representation of electrical components for TM420/500W/650W.
General| Brand | Fimer |
|---|---|
| Model | TM360W |
| Category | Welding System |
| Language | English |
