OWNERS MANUAL 16
SPECIFICATIONS
Fimet F1 chair
Mains connection The separate power supply connects to:
230 V ±10 % 50 Hz or 110 V ±10 % 60 Hz
Electrical data 24 VDC low voltage motors
Microprocessor controlled, self diagnostic
Chair operates at 24 V DC 450 VA
Humidity Operating: 30 - 75 %, storage & transportation: 10 - 100 %
Temperature Operating: +10 - +40 ºC, storage & transportation: -40 - +70 ºC
Protection against electric shock Class I
Protection against liquids Drip-proof IPX I
Operation mode Continuous operation with short-time loading
Fuses T 2 A two pieces
Mounting To be fixed to the floor or heavy metal plate
Chassis Welded steel frame. All visible parts cast in composite material
Max lift weight 180 kg or 400 Lbs
Net weight 110 kg or 240 Lbs
Upholstery Upholstery, headrest and armrests cast composite material.
Additional materials on demand.
Movements Seat height max. 91 cm or 37 inches, min. 35 cm or 14 inches
The initial seat height adjustable 10 cm or 4 inches by factory
Backrest angle 90°
Rotation ± 90°
Trendelenburg angle 9°
In the case of problems please contact retailer. The manufacturer will assist also if required.
Fimet Oy
Teollisuustie 6
FIN 07230 Monninkylä
Phone +358 19 521 6600
Fax +358 19 521 6666
E-mail: fimet@fimet.fi
To Next Page
