FINE mechatronics FS-8000 - More Basic Device Functions

---------------------------------------------------------------------------------
FINE MECHATRONICS FS8000
33
EMPTY SIGNAL MODE
0 If a weight is ZERO("0"),Empty signal will be showed.

Empty Signal will be showed on a weight
( "0" or "under 0")
2
Empty Signal will be showed on a absolute value
Of Empty range
F13-
3 It will be showed on "+range","-range".
* The occurrence of Empty will display ZERO LAMP
SET EMPTY RANGE
F14-
EMPTY
RANGE
Through Setting Empty Range,AUTO Funtion
(TARE,G/T,S/T,HOLD) will be used pratically.
* FIRST SETTING 000010
SET EMPTY STANDARD

Standard for a weight displayed .
1 Standard for Basic Zero value .
F15-
2 Standard for Zero value by TARE setting.
EXTERNAL INPUT MODE
INPUT 1 INPUT 2 INPUT 3 INPUT 4

ZERO TARE N/W G/W
1 ZERO TARE PRINT G/W
2 ZERO TARE HOLD/Remove HOLD
3 ZERO PRINT SUB TOTAL TOTAL
F16-
4 ZERO TARE SUB TOTAL TOTAL
* Input in connecting COM terminal and Input Terminal.
The time to input is over 0.05 sec
* Convert in inputting N/W.
Delete Totalization Information

CLR + SUB TOTAL , Deleting in inputting
CLR + TOTAL .
F18-
1 Auto deleting in printing Sub-Total,TOTAL