FINE mechatronics FS-8000 - 5-4-4. OP-07 Printer; Printer Selection and Output Examples

---------------------------------------------------------------------------------
FINE MECHATRONICS FS8000
49
5-4-4. OP-07 PRINTER
* This printer Interface have Centronics Parallel and Serial system.
* SERIAL is from 1 to 999999
* CODE figure is 6(six) and set according each PART.
* SUB TOTAL can be momoried till 10figures.
* GRD TOTAL can be momoried till 12figures.
* The data can be kept in spite of stoppage of the power
PRINTER SELECTING

PRITNT SHEET 0
1 PRTINT SHEET 1
F71-
PRINT SHEET 1
============
DATE : 1999-01-01
TIME : 12:35:07
CODE : 123456
SERIAL PART WEIGHT
1 1 1.000 kg
============
DATE : 1999-01-01
TIME : 12:35:07
CODE : 123456
SERIAL PART WEIGHT
2 1 1.000 kg
============
SUB-TOTAL
START : 1998-12-30 8:12
END : 1999-01-01 14:26
PART : 01
CODE : 123456
COUNT = 2
WEIGHT = 2.000 kg
PRINT SHEET 0
============
DATE : 1999-01-01
TIME : 12:35:07
CODE : 123456
SERIAL PART WEIGHT
1 1 1.000 kg
2 1 1.100 kg
3 1 1.200 kg
4 1 0.900 kg
5 1 1.000 kg
============
SUB-TOTAL
START : 1998-12-30 8:12
END : 1999-01-01 14:26
PART : 01
CODE : 123456
COUNT = 5
WEIGHT = 5.200 kg