USE AND MAINTENANCE MANUAL
Road Sweeper S150
Page 13 of 54
2. GENERAL CHARACTERISTICS AND TECHNICAL
DESCRIPTION
2.1.
MACHINE DIMENSIONS
- Total length 3740 mm - 4230 mm (with third brush)
- Overall width: 1250 mm
- Total height: 1990mm
2.2.
FRAME
The frame is made of steel and constitutes the supporting structure of all vehicle components.
The frame is provided of four wheels arranged on two axles: the rear drive one is rigidly secured
to the frame and the front steering one is equipped with leaf spring suspension.
2.3.
WASTE CONTAINER
The waste collecting container is made of Stainless Steel. Its top is closed by an iron lid openable
by gravity during unloading. The lid is provided with a metallic filter made of perforated sheet, to
prevent the escape of volatile wastes such as paper, leaves, etc... At the lower part of the
container is the outlet for the recovery and discharge of waste water used to remove dust at the
suction mouth. The container is completely watertight and to increase its working capacity it can
be loaded with about 100 litres of water to be used as recycled water. The mechanism is hand-
operable though a lever-operated ball valve. Between the lid and the container is a sealing
To Next Page