USE AND MAINTENANCE MANUAL
Road Sweeper S150
Page 24 of 54
4.2.
TRANSFER TO THE WORKING AREA
After starting the engine, select the steering column switch unit lever [See Picture 2] to choose
the required direction of travel.
Select the speed level:
Transfer speed position II
To move forward, press the relevant control pedal "A"[See Picture 3]
Picture 3
Picture 2
Picture 4
PLEASE NOTE: The transfer speed can be adjusted by varying the number of revolutions of the
engine, using the manually operated lever on the column at the left of the operator and the
pedal shown in Picture 3.
To Next Page