129
5
MAINTENANCE
id.:
DB 260 REV. 00 01/07/2015
During tyre change or repair, always fi t adequate stands or supports D capable of supporting the weight of the
vehicle under the axles.
After fi tting the wheel, tighten the nuts in the order shown in the fi gure illustrating wheel nut tightening.
13
D
If you want to invert a wheel, operate as shown in the fi gure; you cannot interchange the tyres crosswise,
because of the type of tread.
Fit the wheels with the tyre tread facing in the direction shown in the fi gure.
14
To Next Page