00-02-0796 - 17 - 2013-04-08
Setup 4-Up Display
There are two 4-up display screens available. Each option
can place parameter data into one of four areas on the
screen known as quadrants. ƒ Factory defaults for the first
4-up display include coolant temperature, engine speed, oil
pressure, and battery voltage. ƒ Factory defaults for the
second 4-up display include DEF (
diesel exhaust fluid) Level,
DPF (
diesel particulate filter) active regen status, exhaust filter
inlet temperature, and exhaust filter outlet temperature. You
can customize each 4-up display with the parameter you
define for each quadrant.
1. Touch Menu and use the Arrow Keys to highlight
SETUP 4-UP DISPLAY, and touch Enter.
2. To select USE DEFAULTS, highlight the option and
press Enter. A message indicating “RESTORED TO
DEFAULTS” is displayed.
3. To select CUSTOM SETUP, highlight the option and
press Enter. The 4-up display appears.
To Next Page