00-02-0796 - 16 - 2013-04-08
Continue to scroll and select additional parameters for
the CUSTOM 1-UP DISPLAY. Touch Menu at any time
to return to the CUSTOM SETUP menu.
3. Automatic Scan – (Default is OFF) Selecting the
AUTOMATIC SCAN ON function will cause the 1-up
display to scroll through the selected set of parameters
one at a time.
Once the Use Defaults, Custom Setup and Automatic
Scan functions have been set, touch Menu once to return
to the Main menu, or twice to display the 1-up display
screen.
To Next Page