Firetrol FTA560F - Keypad Shortcuts

Keypad Shortcuts to See Parameter Settings and Recorded Values
Place controller into Auto mode by pressing ON/OFF pushbutton (for about 2 seconds) so
the ON/OFF LED on the upper right-hand corner of the keypad will be lit in green.
• Stop Pressure: press Up arrow button
• Start Pressure: press Down arrow button
• ON Delay Timer: simultaneously press the Down arrow button and left arrow button
• OFF Delay Timer: simultaneously press the Up-arrow button and left arrow button
• Number of times pump has started: simultaneously press the Up-arrow button and
right arrow button
• Pump Running Elapsed Time: simultaneously press the down arrow button and right
arrow button
Stop Pressure Off Delay Timer # of Starts
Start Pressure
On Delay Timer Elapsed Run Time
(Hours)
AUTOHAND
AUTOHAND
AUTOHAND
AUTOHANDAUTOHAND
AUTOHAND
8