Fischer Panda xControl Series User Manual

Panda xControl
Page 12 - Chapter 2: Panda xControl 29.9.16
Fig. 2.3.3-4: Overview Page 3 Symbols/EnglishOverview Page 3:
09. Frequency of the generator [Hz]
10. Generator speed (r.p.m.)
11. Voltage of the starter battery [V]
Fig. 2.3.3-5: Overview Page 4 Symbols/EnglishOverview Page 4:
12. Temperature of the cylinder head
13. Temperature of the generator winding
14. Temperature at exhaust manifold
Note!:If the information pages of optional components (e.g. fuel
gauge, oil pressure) are available, then these pages are
inserted after Overview Page 4.
Whether these pages are displayed automatically, always or
not at all can be set in the Panel menu.
Fig. 2.3.3-6: Final overview pageFinal Overview Page:
Proceed to this menu by pressing the Start/Stop - Enter key
Overview Page 5 is the same in all display modes/languages.
09
10
11
09
10
11
12
13
14
12
13
14

Fischer Panda xControl Series Specifications

General

Brand	Fischer Panda
Model	xControl Series
Category	Controller
Language	English