Fischer Panda xControl Series User Manual

Panda xControl
29.9.16 Chapter 2: Panda xControl - Page 9
2.3 Operation
The xControl is operated by means of the xControl CP-G panel.
Fig. 2.3-1: xControl CP-G front
2.3.1 Switching on the generator
Fig. 2.3.1-1: Switching on the generatorPress the "ON/OFF" switch to switch on the control
system of the generator.
The xControl Generator thereby switches to "standby mode".
If automatic starting is activated at the menu, the
generator can henceforth be started by means of an
external signal.
Fig. 2.3.1-2: Home PageThe CP-G Panel displays the home page for two seconds.
Fig. 2.3.1-3: Address PageThe CP-G then displays the address page for one second

Fischer Panda xControl Series Specifications

General

Brand	Fischer Panda
Model	xControl Series
Category	Controller
Language	English